Created with Sketch. Created with Sketch.

Schnitz Electric Oil Scavenge Pump

Oil Scavenge PumpThe Schnitz Racing Electric Scavenge Pump allows oil from your turbo to be quickly removed and placed back into your engine. 

If a turbo is mounted below engine oil level it can not properly drain.  The solution is a scavenge pump.

With brass gears and a powerful motor, the Schnitz Scavenge Pump can self prime up to 3 feet and can move up to 2 gallons of oil per minute while only drawing 3 amps at 12 volts.

This pump is made to last! A nickle finish on the gear housing and 3/8" NPT fittings along with a durable powdercoat finish on the motor will keep this pump looking good for all of it's 1000 hours of expected life. Four 3/16" rubber mounting holes spaced 3 1/8" apart allow this to be mounted on a swingarm, subframe or any convenient location.

Wiring is simple with just a positive 12 volt and ground connection. We recommend wiring this to a relay and using your fuel pump relay output to activate the relay and pump. This ensures your pump is on only when your engine is running.

  • Brass gears 
  • Current draw is 3 amps, 12-volt 
  • Total length invluding screws is 5"
  • Body of the pump is 2" diameter 
  • Width of mounting base is 4"
  • Height from base to top of pump is 3" (including the rubber isolators)
  • 3/8" NPT male thread 
  • Can run dry for brief periods of time
  • Self-priming up to 3 feet
  • Brushes and pump rated at 1000 hours 
  • 3-amp fuse must be installed