Carburetors/Jets/Seals

Carburetor Main Jet Kawasaki KLR650

  Features Brass carburetor jets are high precision and flow-calibrated for extremely accurate fuel flow rate Available in a range of sizes for Keihin applications High-quality replacement Price each Fits 87-13 Kawasaki KLR650

K&L Fuel Petcock Rebuild Kit Kawasaki KLR650

Features: Kit contains all necessary O-rings and diaphragms to rebuild one fuel petcock. Made In Japan Fits 87-20 Kawasaki KLR650

Kawasaki OEM Carburator Holder for 33-40mm Lectrons KZ900-KZ1000-KZ1000J

The carb holders are for the 1973-1980 KZ900-1000 bikes, for use with 33 smooth bores or 36-38-40mm Mikuni carbs, or for use with Keihn Carbs.  They are available in sets of (4) or each.  Every carb holder comes with the 2 mounting screws...

Kawasaki OEM Carburator Holder Plug KZ900-KZ1000-J-GPz

These are the little rubber pieces that goes on the carb holders. Each carb holder requires one.  They sometimes crack and cause a rough idle situation, or a lean condition.

Kawasaki OEM Float Bowl Gasket Kawasaki KLR650

Features: Stock Gasket/O-ring Great to have for a spare if you're planning jetting changes Fits 87-13 Kawasaki KLR650

Kawasaki OEM Left Side Carburator Holder KZ900-KZ1000

This is the left side carburator holder for the 1976-1980 KZ900-KZ1000.  These fit the stock 26mm or 28mm carbs and the aftermarket 29mm Mikuni carbs only. If you have Mikuni Flat Slides, 34mm, 36mm, 38mm, or 40mm you will need to use the...

Kawasaki OEM Right Side Carburator Holder KZ900-KZ1000

This is the right side carburator holder for the 1976-1980 KZ900-KZ1000.  These fit the stock 26mm or 28mm carbs and the aftermarket 29mm Mikuni carbs only. If you have Mikuni Flat Slides, 34mm, 36mm, 38mm, or 40mm you will need to use the...

Lectron Throttle Switch

Features: Designed to eliminate inconsistent old style plastic switched throttles and heavy weight billet aluminum throttles. Pre wired to make it easier to install. Comes with billet carburetor top, switch, gasket and bolts. Can be mounted on...

Mikuni Radial Flat Slide Carburetors

Part# 001 The Mikuni RS Series Carburetors were designed and built in response to the needs of the world's top motorcycle road race and drag race teams. They required carburetors which could satisfy the precise fuel metering demands and high flow...

Pingel Weldless Tank Bung

  Features: Use when an alternative fuel source is needed, like when installing a "wet" nitrous kit on fuel-injected motorcycles Requires a 9/16" hole for mounting; will work with any tank up to 5/8" wall thickness 1/8" NPT internal thread size...

Schnitz KLX Needle Assembly Kawasaki KLR650 (87-20)

The KLX Needle is an adjustable needle that works well with the KLR650. Fits ALL KLR's from 1987 to 2020. Including the "Tengai" This needle is richer than a "DYNO-JET" needle, and much richer than the stock KLR's. If used with a stock or...

Suzuki OEM Carburetor Holder GS1150

*Fits Suzuki 1983-1986 GS1150

Suzuki OEM Left Side Carburetor Holder GS1100

*Fits Suzuki 1980-1983 GS1100

Suzuki OEM Right Side Carburetor Holder GS1100

*Fits Suzuki 1980-1983 GS1100