Suzuki

MTC Slider Clutch Suzuki Hayabusa (99-25)

Proven. Reliable. Championship-Winning. MTC Engineering clutch components are trusted by record-setters and champions worldwide. Known for their unmatched quality and performance, MTC clutches consistently deliver results on the track and in the...

RCC Stainless Steel Throttle Blades Suzuki Hayabusa (08-21)

  Stainless Steel Throttle Blades for 2008-2021 Suzuki Hayabusa Don’t let a bent throttle blade ruin your race day! These stainless steel throttle blades are built to handle the heat, giving you peace of mind when pushing your bike to...

ABS Delete Kit Suzuki Hayabusa (22-25)

Introducing our ABS Delete kit tailored for the Suzuki Hayabusa 2021+. This comprehensive kit comes complete with a plug-and-play wiring harness that effortlessly connects to the Front and Rear Wheel Speed Sensors, along with the OBD Connector. By...

Adams Performance Lowering Links Suzuki GSXR1000 (07-24)

These fully adjustable lowering links provide you an easy way to lower your bike for the track or for bike night, then raise it back up for street riding. Features: CNC Machined Billet Aluminum Teflon Coated Pivot Points Adjustable While...

Adams Performance Straight Link Suspension Arm Suzuki Hayabusa (99-25)

  Adams Performance's straight links are designed to allow more ground clearance on lowered bikes.  By replacing the stock suspension arm with this new design, a bike can add up to 2" more ground clearance and also allow the bike to be...

Adams Performance Straight Link Suspension Arm Suzuki GSXR1000 (01-06)

This Suspension Arm is designed to allow more ground clearance for Drag Racing or for show bikes. Optimized for Drag Racing & Show Bikes – Increases ground clearance for improved performance and aesthetics. Premium 6061 Billet Aluminum...

AEM 320 LPH High Flow In-Tank E85 Fuel Pump Suzuki Hayabusa (01-12)

  The AEM E85 Fuel Pump is designed for in-tank installation on high performance naturally aspirated and forced induction vehicles. It flows 320 lph (84 gph) at 43 PSI (please refer to the chart for fuel pump horsepower versus pressure for...

AEM 320 LPH High Flow In-Tank Fuel Pump Suzuki Hayabusa (01-12)

AEM’s 340LPH High Flow In-Tank Fuel Pump is designed for high performance naturally aspirated and forced induction EFI vehicles. It delivers reliable performance and high volumes of fuel flow for roughly half the cost of comparable performance...

AEM Adjustable Fuel Pressure Regulator

AEM's Universal Adjustable Fuel Pressure Regulator is capable of supporting enough fuel flow for engines up to 1000 horsepower. Our patented interchangeable discharge ports enable the regulator's output to match the output of any fuel pump. Our...

Akrapovic Racing GP Exhaust System Suzuki GSXR1000R (17-25)

The Akrapovic GP-styled Racing Exhaust is a high-performance exhaust that takes design cues from the exhaust found on leading WSBK factory machines. Made from stainless steel, a race-proven material, this exhaust system results in a boost in performance...

Akrapovic Racing GP Exhaust System Suzuki Hayabusa (08-20)

The Akrapovic Racing Line has been designed specifically for demanding riders and represents an ideal balance between price and performance. The exhaust systems are dramatically lighter compared to stock exhaust systems and feature exceptional...

Akrapovic Racing GP Exhaust System Suzuki Hayabusa (22-25)

  Akrapovic Racing Exhaust System Suzuki Hayabusa  The Akrapovic Racing Line has been designed specifically for demanding riders and represents an ideal balance between price and performance. The exhaust systems are dramatically lighter...

Aluminum Engine Mount Frame Inserts Suzuki Hayabusa (99-25)

Upgrade to our lightweight aluminum motor mount inserts, a high-performance alternative to stock steel inserts. These aluminum inserts weigh only 3.52oz, offering a significant reduction in weight compared to the stock steel inserts, which weigh 7.92oz...

Analog Gear Position Sensor, 360 Degree, Suzuki GSXR1000 (01-16)

  The Analog Gear Position Sensor is designed to eliminate the erratic signal from an OEM gear position sensor and provide a clean voltage output that accurately reflects the full 360° of shift drum rotation. This sensor allows for positive...

Analog Gear Position Sensor, 360 Degree, Suzuki Hayabusa (99-20)

  The Analog Gear Position Sensor is designed to eliminate the erratic signal from an OEM gear position sensor and provide a clean voltage output that accurately reflects the full 360° of shift drum rotation. This sensor allows for positive...

APE Adjustable Cam Sprockets Suzuki GS1100-GS1150

Maximize your engine's potential with APE Adjustable Cam Sprockets, unlocking untapped horsepower by fine-tuning your cam timing for optimal performance. These precision-engineered sprockets replace the non-adjustable OEM counterparts, providing...

APE Adjustable Cam Sprockets Suzuki GSX-8R (2024)

Maximize your engine's potential with APE Adjustable Cam Sprockets, unlocking untapped horsepower by fine-tuning your cam timing for optimal performance. These precision-engineered sprockets replace the non-adjustable OEM counterparts, providing...

APE Adjustable Cam Sprockets Suzuki GSXR1000 (01-16) GSXR750 (00-24) GSXR600 (01-24)

Maximize your engine's potential with APE Adjustable Cam Sprockets, unlocking untapped horsepower by fine-tuning your cam timing for optimal performance. These precision-engineered sprockets replace the non-adjustable OEM counterparts, providing...

APE Adjustable Cam Sprockets Suzuki GSXR1000 (17-25)

APE’s new adjustable cam sprockets for the 2017+ GSXR1000 eliminates the variable cam timing on the intake cam. Perfect for setting the desired timing for drag race and Landspeed engines.  Completely bolt on.  Can easily be converted...

APE Adjustable Cam Sprockets Suzuki GSXR1100 (86-92) GSXR750 (88-89)

Maximize your engine's potential with APE Adjustable Cam Sprockets, unlocking untapped horsepower by fine-tuning your cam timing for optimal performance. These precision-engineered sprockets replace the non-adjustable OEM counterparts, providing...

APE Adjustable Cam Sprockets Suzuki GSXR1100 (93-98) GSXR750 (92-95) GSXR600 (88-96)

Unlock additional horsepower by timing your cams for optimal performance. APE adjustable cam sprockets press on the camshaft replacing the non-adjustable OEM sprockets. Offers unlimited adjustment. Features: Offers precise cam timing to...

APE Adjustable Cam Sprockets Suzuki GSXR750 (86-87) (90-91)

Maximize your engine's potential with APE Adjustable Cam Sprockets, unlocking untapped horsepower by fine-tuning your cam timing for optimal performance. These precision-engineered sprockets replace the non-adjustable OEM counterparts, providing...

APE Adjustable Cam Sprockets Suzuki GSXR750 (96-99) GSXR600 (97-00)

Maximize your engine's potential with APE Adjustable Cam Sprockets, unlocking untapped horsepower by fine-tuning your cam timing for optimal performance. These precision-engineered sprockets replace the non-adjustable OEM counterparts, providing...

APE Adjustable Cam Sprockets Suzuki Hayabusa (99-25)

Maximize your engine's potential with APE Adjustable Cam Sprockets, unlocking untapped horsepower by fine-tuning your cam timing for optimal performance. These precision-engineered sprockets replace the non-adjustable OEM counterparts, providing...

APE Air Injection Block Off Plates Suzuki GSXR1000 (01-08)

What do these do? - To meet federal regulations, OEM's use clean air injection that adds oxygen to the exhaust.  This allows unburnt fuel to burn and reduce hydrocarbon emissions into the atmosphere.  For this to properly work,...

APE Air Injection Block Off Plates Suzuki Hayabusa (08-25)

What do these do? - To meet federal regulations, OEM's use clean air injection that adds oxygen to the exhaust.  This allows unburnt fuel to burn and reduce hydrocarbon emissions into the atmosphere.  For this to properly work,...

APE Billet 6mm Crankshaft Suzuki GSXR1000 (17-25)

6mm Billet Stroker Crank – GSX-R1000 (2017-2025) Looking for more power and reliability? This 6mm Billet Stroker Crankshaft is built for the 2017-2025 GSX-R1000, delivering top-notch performance and durability. Features: Direct-shot oiling...

APE Billet Crankshaft Suzuki Hayabusa (99-25)

APE Race-Prepped and Modified Crankshafts For over 22 years, APE has been the leader in motorcycle crankshaft modification and race preparation. Renowned for its expertise, APE offers precision services like lightening and race balancing, designed to...

APE Billet Starter Plate Suzuki Hayabusa (99-25)

Elevate your drag racing Hayabusa to new heights with the APE Outboard Starter Plate and Nut Kit – a game-changer for engine builders seeking optimal performance. Specifically designed for drag racing Hayabusas equipped with Lectron carbs and a...

APE Clutch Slave Support Bracket Suzuki Hayabusa (99-07)

If you own a Suzuki Hayabusa of any year and you have modified your clutch in anyway, then pay close attention.  The clutch cover support from APE is designed to give maximum support to the clutch slave cylinder cover. The thin cover casting can...

APE Clutch Spring Kit Suzuki Hayabusa (08-20)

Elevate your Hayabusa's clutch game with APE – where power meets precision!  Introducing our High-Performance Clutch Springs, engineered to perfection and crafted for the true power enthusiasts out there.  Key Features: Unleash...

APE Clutch Spring Kit Suzuki Hayabusa (99-07)

APE offers the strongest clutch springs available for the Hayabusa (60 psi). Originally designed for the tremendous loads of Hayabusa-powered race cars, they are the answer for clutch slippage in big bore/stroker motors as well as turbo or...

APE Counter Balancer Removal Shaft Suzuki GSXR1000 (01-08)

This billet aluminum "dummy" shaft allows you to easily eliminate the counter balancer and shaft(s) from your engine. Simply remove the stock assembly and insert this shaft in its' place. All oil passages are plugged by the shaft and o-rings...

APE Counter Balancer Removal Shaft Suzuki Hayabusa (99-25)

This billet aluminum "dummy" shaft allows you to easily eliminate the counter balancer and shaft(s) from your engine. Simply remove the stock assembly and insert this shaft in its' place. All oil passages are plugged by the shaft and o-rings...

APE Cylinder Head Nuts

  Super heat treated cylinder head nuts are a must for high output engines.  Help prevent blown and leaking head gaskets caused by the threads in the soft stock nuts stretching. APE nuts are machined from alloy steel and fully heat treated...

APE Cylinder Studs Suzuki GS1100

  Studs are the preferred fastener choice for high performance engines. Unlike a bolt, a stud uses all of the threads in the case, and it doesn't have to be removed during disassembly which adds wear on the case threads. Studs don't twist like...

APE Cylinder Studs Suzuki GS1150

  Studs are the preferred fastener choice for high performance engines. Unlike a bolt, a stud uses all of the threads in the case, and it doesn't have to be removed during disassembly which adds wear on the case threads. Studs don't twist like...

APE Cylinder Studs Suzuki GSXR1000 (01-16)

  Studs are the preferred fastener choice for high performance engines. Unlike a bolt, a stud uses all of the threads in the case, and it doesn't have to be removed during disassembly which adds wear on the case threads. Studs don't twist like...

APE Cylinder Studs Suzuki GSXR1000 (17-25)

Studs are the preferred fastener choice for high performance engines. Unlike a bolt, a stud uses all of the threads in the case, and it doesn't have to be removed during disassembly which adds wear on the case threads. Studs don't twist like bolts when...

APE Cylinder Studs Suzuki Hayabusa (99-25)

  Studs are the preferred fastener choice for high performance engines. Unlike a bolt, a stud uses all of the threads in the case, and it doesn't have to be removed during disassembly which adds wear on the case threads. Studs don't twist like...

APE Cylinder Studs Suzuki Hayabusa (99-25) Heavy Duty 1/2"

These studs are made from heat treated chrome moly steel, fully ground with rolled threads for maximum strength. They come with special machined twelve point nuts and washers designed to fit in the busa head with no modifications. Who would need...

APE Inconel Exhaust Valves Suzuki Hayabusa (99-25)

The latest addition from APE is the oversize Hayabusa exhaust valve (28.5mm) made from INCONEL. It was developed at the request of top turbo Pro Street Builders. Inconel has the ability to withstand tremendous amounts of heat, which the turbos are...

APE Low Profile Crankcase Breather Cover Plate Suzuki GSXR1000 (01-08), GSXR750 (00-05), GSXR600 (01-05), GSX-S1000 (17-22), GSX-S750 (18-22)

APE offers billet low profile breather covers for the GSXR1000. Uses OEM gasket. Comes with 4 mounting bolts and special breather hose fitting. Features: Billet Aluminum Comes with Mounting Bolts Replaces OEM 11370-35F00 Fits the...

APE Low Profile Crankcase Breather Cover Plate Suzuki Hayabusa (99-25)

APE offers billet low profile breather covers for the Suzuki Hayabusa. Offered in three styles. Single outlet, as the oem unit, dual outlet, for some very large motors that may need more breathing capacity, and no outlet for motors using vacuum pumps...

APE Main Bearing Studs Suzuki GS1100 & Early GS1150

These studs feature rolled threads, centerless ground surfaces, and come with competition style twelve point flange nuts. As racing's leading supplier of heavy duty engine stud kits, APE already has their very popular top end cylinder studs for...

APE Main Bearing Studs Suzuki GSXR1000 (01-08)

These studs feature rolled threads, centerless ground surfaces, and come with competition style twelve point flange nuts. As racing's leading supplier of heavy duty engine stud kits, APE already has their very popular top end cylinder studs for...

APE Main Bearing Studs Suzuki Hayabusa (99-25)

  These studs feature rolled threads, centerless ground surfaces, and come with competition style twelve point flange nuts. As racing's leading supplier of heavy duty engine stud kits, APE already has their very popular top end cylinder...

APE Main Bearing Studs Suzuki Late GS1150

**For the 8mm and 9mm type engines These studs feature rolled threads, centerless ground surfaces, and come with competition style twelve point flange nuts. As racing's leading supplier of heavy duty engine stud kits, APE already has their very...

APE Manual Cam Chain Tensioner Pro Series Suzuki GSXR1000 (03-08) GSXR750 (04-07) GSXR600 (04-07)

APE introduces the Pro Series manual cam chain tensioner. This new tensioner is designed for the racer who frequently adjusts his engine. The easy-access socket head adjuster screw is perfect for tight spaces. The interior o-ring design ensures that...

APE Manual Cam Chain Tensioner Pro Series Suzuki Hayabusa (08-25) GSXR1000 (09-25) GSXR750 (08-25) GSXR600 (08-25)

  Unleash the power of precision with APE's Pro Series Manual Cam Chain Tensioner – a revolutionary addition designed for the dedicated racer who demands frequent engine adjustments. Elevate your engine tuning experience with this...