Nitrous Electronics

Daytona Sensors NC-2 Progressive Nitrous and Data Logger

Features: Drives two nitrous stages and purge solenoid. NC-2 is capable of 40 amp output on each stage Each stage is independently programmable based on throttle position, RPM, vehicle speed, time delay, and first gear lockout. NC-2 adds...

Holley EFI High Current Nitrous Driver

  High Current Nitrous Solenoid Driver for use with Holley EFI Features: 40 Amp maximum current draw Wiring Diagram

Micro Storm Progressive Wiring Harness

Replacement Wiring Harness for Micro Storm Progressive Nitrous Controller

NOS 2 Stage Mini Nitrous Controller

  Getting the most out of your nitrous system and putting more power to the ground when traction is at its best is the goal with anyone using nitrous as a Power Adder. The new, updated Mini 2-stage progressive nitrous controller from NOS...

NOS 2 Stage WOT/RPM Activated Window Switch

    Tired of having to replace RPM pills every time you want to change the activation RPM of your nitrous kit? How About needing two RPM activated window switches to control your 2 stages of nitrous? Well, your worries and woes are...

NX Fuel Pressure Safety Switch

A NX Fuel Pressure Safety Switch adds another safety feature to your nitrous system by allowing the nitrous to disarm if the fuel pressure drop below a set point.

NX Maximizer EZ Progressive Nitrous Controller

The NX Maximizer EZ Progressive Nitrous Controller pulses your nitrous and fuel solenoids to smoothly ramp in your nitrous power resulting in increased traction and less strain on your vehicles drivetrain.  The progression ramp automatically...

NX TPS Wide Open Throttle (WOT) Switch

The NX Wide Open Throttle (WOT) Switch allows the nitrous system to only operate if the throttle is at or near fully open.  This reduces the change of engine damage and accidental engagement.  This kit allows you to wire into your stock...

NX TPS WOT/Digital RPM Window Switch

This innovative module monitors engine rpm as well as throttle position to automatically control nitrous flow based on user adjustable RPM and TPS values.The large LCD display is easy to read and the setting can be quickly viewed and changed without...

NX Wide Open Throttle (WOT) Switch

The NX Wide Open Throttle (WOT) Switch allows the nitrous system to only operate if the throttle is at or near fully open.  This reduces the change of engine damage and accidental engagement. *Note - It is recommended to use a relay.

NX Wide Open Throttle (WOT) Switch and Bracket

The NX Wide Open Throttle (WOT) Switch allows the nitrous system to only operate if the throttle is at or near fully open.  This reduces the change of engine damage and accidental engagement. Includes: WOT Switch w/Hardware Universal...

NX Wide Open Throttle (WOT) Switch Bracket

The NX Wide Open Throttle (WOT) Switch allows the nitrous system to only operate if the throttle is at or near fully open.  This reduces the change of engine damage and accidental engagement. *Note - Bracket is universal

NX Wide Open Throttle (WOT) Switch Kit

The NX Wide Open Throttle (WOT) Kit allows the nitrous system to only operate if the throttle is at or near fully open.  This reduces the change of engine damage and accidental engagement. Includes: WOT Switch w/Hardware Universal Mounting...

RSR Micro Storm Race Spec Wiring Harness Suzuki GSX1300R Hayabusa (08-20)

The Micro Strom Wiring Harness for the Suzuki GSX1300R Hayabusa (08-20) is a Race Spec Harness that allows a quick and simple installation. We use only Mil-spec wire and Raychem DR-25 shrinkable tubing that is flame retardant and resistant...

RSR PC-V Nitrous Race Spec Wiring Harness Kawasaki ZX14R (12-24)

The Schnitz Racing Nitrous Wiring Harness is a Race Spec Harness that is completely plug and play.  No cutting, splicing or permanent change to your stock wiring harness.  We use only Mil-spec wire and Raychem DR-25 shrinkable tubing that is...

Schnitz 2 Dial Progressive Nitrous Controller

This basic nitrous controller was designed for a simple and cost effective means to deliver nitrous power. A simple user interface and simplified wiring installation help to make the controller very user friendly. The starting power percentage can be...

Schnitz 40 Amp 5 Prong Relay

40 Amp Relay Universal Fit 5 Prong Wiring: 85 - 12 Volt86 - Ground30 - Common87 - Normally Open87a - Normally Closed

Schnitz ECU Nitrous Harness Suzuki GSX1300R Hayabusa (08-20)

The Schnitz Racing ECU Nitrous Harness allows quick and easy wiring of your dry nitrous kit to the stock ECU for full nitrous control. Plugs into the stock PAIR Connector and uses ECUeditor to adjust nitrous and fuel delievery. Fully plug and play...

Schnitz Micro Storm Progressive Nitrous Controller

The Micro Storm progressive nitrous controller provides control for 2 stages of nitrous in an extremely small package of just 2 7/8" x 1 3/4" x 3/4". The billet aluminum enclosure is anodized black with a 3 digit display and 3 high quality push buttons...

Switch Swapper

The Switch Swapper allows you to quickly and easily wire up an air shifter or nitrous system to your horn and/or starter button. Easy To Install  Super Small 2.125" x 1.375" x .580"  Self Adhesive Installation Comes with Instructions