MPS

Adjustable Air Pressure Regulator

Control Pressure with Precision and Reliability Upgrade your setup with our versatile Pressure Regulator (P/N 1-0352), designed to handle high-performance applications with ease. Equipped with four...

Air Shifter Cylinder

    This is a replacement air shifter cylinder for air shifter kits. You can also use this to build your own system. Junior Cylinder uses 1/4" air line and is the most common and used on...

Air Shifter Cylinder Clevis

The clevis is the end of the air shifter ram that is attached to your shift lever.

Air Tank and Nitrous Bottle Clamps

Features: Black Anodized Billet Aluminum Lots Of Mounting Options Holds 2", 3.25" and 4 3/8" Diameter Bottles

Air Tank Bottle

This Air Bottle is the same unit supplied with the standard air shifter kits.   8.5" Tall x 3.25" Dia.   *Does not come with fittings.   

CO2 Bottle Components

Replacement Pin Valves, Actuators, Adapters and a Filler Assembly for the CO2 Air System.

CO2 System 7oz with Regulator

This CO2 System offers numerous shifts with a single bottle fill, eliminating the need for an onboard air compressor after each use. With its compact 7oz size (10.75" long, 2" diameter), it's...

Dial In Plate

Just think of all the problems you can eliminate with a trick and inexpensive Dial In Board. No more running around frantically looking for shoe polish! No more wrong dial ins because...

External Pump Fuel Tank Cover

Want to run an external pump with a newer style gas tank? This is the way to go. The cover comes with -6an fittings installed. Fits Suzuki Hayabusa 01-20

Fuel Injector Kit, 62lb, Suzuki Hayabusa (99-07)

Hayabusa 62 lb. Injector Kits. These injectors flow almost 3x more fuel than standard 24 lb. Stock Hayabusa injectors. They are ideal for turbo applications where much more fuel is needed. They fit...

Fuel Injector Kit, 80lb, Suzuki Hayabusa (99-07)

Hayabusa 80 lb. Injector Kits. These injectors flow almost 4x more fuel than standard 24 lb. Stock Hayabusa injectors. They are ideal for really high horsepower guys. They fit in the stock fuel rail...

Fuel Rail Tap Suzuki GSX1300R Hayabusa (99-07)

Direct replacement of stock units Allows use of 1/8" npt fittings Use 2 to allow fuel flow through the rail (stock system is dead headed) Sold each *Note - Fits 1999-2007 Suzuki GSX1300R...

Low Profile Billet Trap Door Oil Pan Suzuki Hayabusa (99-24)

Hayabusa Trap Door Oil Pans: The trap door design allows oil to flow freely to the back of the pan during acceleration. During deceleration the door closes and traps the oil in the back of the pan...

Low Profile Breather Cover Suzuki Hayabusa (99-20)

Features: Billet Aluminum Hard Anodized Black Only Low Profile - 7/8" Tall Female 1/4 NPT Breather Outlet

MPS "Premium" Air Shift Module Wiring Harness

Premium Plug-and-Play Harness for RSR Air Shift Module This top-tier quality plug-and-play harness is designed for RSR Air Shift Modules, featuring adhesive shrink wrap and high-quality wiring for...

MPS Air Shift Module Wiring Harness

  The MPS RSR Air Shift Module (ASM) Wire Harness was designed with ease of install in mind. This harness requires no cutting or splicing into your factory harness. It also includes a toggle...

MPS Dry Nitrous Kit

  Just imagine another 20 to 40 horsepower in just 2 hours! That’s the reality of our Dry Nitrous Kit For Fuel Injected Motorcycles. Flip the switch to activate the nitrous and turn...

MPS Nitrous Solenoid Rebuild Kit

  This is the rebuild kit for the MPS 1-0389 Nitrous Solenoid.  It consists of critical components necessary to bring solenoids back into service quickly and conveniently. 

MPS Nitrous Solenoids

MPS has two types of nitrous solenoids. The standard MPS nitrous solenoid features a .063” orifice good for up to 100 horsepower and our "400+" HP solenoid that has a giant .125" orifice...

MPS Pro Pushbutton Replacement Parts

  Please Note: Between 10/2006 and 03/13/2012 all MPS pro pushbuttons were made using metric style switches, buttons and guards. We are now building all our pro pushbuttons with our...

MPS Pro Pushbutton Switch Assembly

The MPS Pro Pushbuttons are CNC machined from aircraft aluminum then anodized black for a good looking rugged finish. It houses precision momentary single pole double throw switches. The Pro...

MPS Tether Kill Switch

Tether Kill Switches are the standard of the industry. CNC machined from billet aluminum then hard anodized black for a good looking tough finish. Split design allows easy installation anywhere on...

Nitrous Bottles, Black

It is advantageous to have spare nitrous bottles; that way you'll always have a full bottle ready to go. Choose from a wide variety of sizes. All  bottles are made from aluminum alloy, are D.O...

Nitrous Purge Kit

  The primary purpose of a purge valve is to release trapped air or gaseous nitrous from feed line(s). It helps to ensure consistent performances and it looks cool also. You've probably seen...

Rear Wheel Speed Trigger Wheel, Suzuki Hayabusa (99-20), GSXR1000 (01-07)

The 8 Tooth Rear Wheel Speed Trigger Wheel fit both Hayabusa & GSXR1000 that are using stock rear wheel speed sensors with aftermarket stand alone ECUs. Double the resolution of the stock Suzuki...

Showerhead Distribution Block

Features 1/8" NPT in and out Accommodates push in or AN fittings CNC Machined Billet Aluminum Black Anodized

Sport Bike Air Shifter Kit

Upgrade your sport bike to precision shifting with the Sport Bike Electric Air Shifter. This revolutionary system provides seamless, perfect shifts at the mere push of a button. The Sport Bike Air...

Sport Bike Kill Box

The new generation MPS Air Shifter Electronic Engine Kills have several new features: The kill time can be adjusted from 10ms to 100ms in 10ms increments. Direct Air Valve activation – air...

Sport Bike Kill Box Wiring Harness

The Air Shifter Plug & Play Wire Harness wires your air shifter without any cutting or splicing. Our harness will make wiring your air shifter a breeze. All connections are labeled, and the...

Spyder Dry Nitrous Kit Kawasaki ZX10R (04-15)

Features: The Spyder Nitrous Spray System uses 4 individual NOS flare jets for exact distribution of nitrous to each cylinder. This eliminates problems with uneven distribution associated with...

Spyder Dry Nitrous Kit Kawasaki ZX14R (06-24)

Features: The Spyder Nitrous Spray System uses 4 individual NOS flare jets for exact distribution of nitrous to each cylinder.  This eliminates problems with uneven distribution associated...

Spyder Dry Nitrous Kit Suzuki GSXR1000 (01-12) GSXR750 (00-12) GSXR600 (01-12)

Features: The Spyder Nitrous Spray System uses 4 individual NOS flare jets for exact distribution of nitrous to each cylinder.This eliminates problems with uneven distribution associated with...

Spyder Dry Nitrous Kit Suzuki Hayabusa (99-20)

Features: The Spyder Nitrous Spray System uses 4 individual NOS flare jets for exact distribution of nitrous to each cylinder. This eliminates problems with uneven distribution associated with...

Switch Swapper

The Switch Swapper allows you to quickly and easily wire up an air shifter or nitrous system to your horn and/or starter button. Easy To Install  Super Small 2.125" x 1.375" x ...

Tether Kill Switch Coil Cord Style

Tether Kill Switches are the standard of the industry. CNC machined from billet aluminum then hard anodized black for a good looking tough finish. Split design allows easy installation anywhere on...

Water Pump Block Off Suzuki Hayabusa (99-20)

The Water Pump Block Off for the Suzuki Hayabusa is designed to plug the engine case for those running without a water pump, or those who have changed to an electric water pump. Billet...