Product Description
Monitor your engine’s exhaust temps with this high-quality EGT sensor. Designed to connect directly to MaxxECU systems, but works great with most other setups too.
- Cable Length: 1.8m
- Sensor Diameter: 4.7mm
- Thread: 1/8 NPT
- Connector: Mini Type-K
Install Tips:
- For stainless steel bungs: hand tighten about 2.5 turns, then add ¾ turn with a wrench.
- For mild steel bungs: hand tighten about 3.25 turns, then add 1 full wrench turn.
Note: Make sure the threads don’t leak, but don’t overtighten — if it’s too tight, it will be impossible to remove later.