Turbo

DME Turbo Oil Scavenge Pump Suzuki Hayabusa (99-20)

The DME Racing Suzuki Hayabusa Scavenge Oil Pump for turbo applications is designed to replace the factory water pump. This pump sucks the oil out of the turbo and moves it back to the engine to eliminate turbo smoke. Our Scavenge Oil Pump easily...

Schnitz Turbo Oil Scavenge Pump Suzuki Hayabusa (99-24)

Upgrade your Suzuki Hayabusa with our cutting-edge solution to eliminate turbo smoking hassles during startup or after periods of inactivity. Introducing our Mechanical Scavenge Pump – a versatile, reusable unit compatible with the Suzuki...

MaxxECU Boost Control Dual Solenoid Kit

MaxxECU Boost Controller: Effortless Closed Loop Boost Control Discover the ultimate solution for your Closed Loop Boost Control System with the MaxxECU Boost Controller. This single unit revolutionizes installation by seamlessly integrating two...

RCC Turbo Billet Aluminum Plenum Suzuki GSXR1000 (07-08)

These billet airbox plenums are available for the Suzuki GSXR1000 (07-08).  Machined from 6061 aluminum and is o-ring sealed. The basic airbox kit includes the airbox only.  Add a 2" charge tube, silicone connectors and/or clamps to make...

RCC Throttlebody Clamp Suzuki GSX1300R Hayabusa (99-07)

This billet aluminum throttlebody clamp uses O-rings and is positively clamped, replacing the stock rubber boots that can fail.  The O-ring seal is superb.  Great for nitrous guys that want good material to drill and tap for their wet nitrous...

RCC Turbo Billet Aluminum Plenum Suzuki Hayabusa (99-20)

These billet airbox plenums are available for the Gen 1 and Gen 2 Hayabusa.  Machined from 6061 aluminum and is o-ring sealed. The basic airbox kit includes the airbox only.  Add a 2" charge tube, silicone connectors and/or clamps to make...

RCC Turbo Header Flange Cast Stainless Steel Suzuki GSX1300R Hayabusa (99-20)

One Piece Hayabusa Header Flange investment cast from 304 stainless steel with the head spigots already on it. Perfect fitment every time and no need to machine up collars for the head spigots. Never worry again about poor fitment to the cylinder head...

RCC Mechanical Oil Scavenge Pump Kawasaki ZX14R (06-24)

Are you fed up with the hassle of installing electric turbo scavenge pumps, dealing with wiring and plumbing intricacies into your oil pan or clutch cover, only to face the disappointment of electric pump failures? It's time to make a change to a...

RCC Mechanical Oil Scavenge Pump Suzuki Hayabusa (99-24)

  Are you tired of the complexities involved in installing electric turbo scavenge pumps, dealing with intricate wiring and plumbing, only to be frustrated by pump failures? It's time to make the switch to the RCC mechanical pump for a...

RCC Air Filter Turbo 3 x 5

This Air Filter for the RCC Stage 1 Turbo Kit has a low profile design and can be cleaned and oiled with K&N cleaner and oil. ID is 3”OD is 5”Filter length is 2.5”Flange length is .750” *Photo is a general representation

AEM Boost Control Solenoid

The model 30-2400 Boost Control Solenoid is specially modified for use in high boost automotive systems. The kit includes all the necessary fittings for either an internal or external wastegate. The 30-2400 Kit Contains: 1x Fast Response...

NLR AMS500 V2 Boost Controller

12 volt or ground triggering LAUNCH and ACTIVATION input. 4 set ups can be saved Launch feature Graphing software (time based only) 100 psi sensor Bullet valve solenoids and manifold for easy installation

Schnitz Electric Inline Universal Water Pump

  Introducing the EBP Brushless Water Pump – your versatile solution for optimal engine cooling in any application, whether it's nitrous, turbo, or all-motor setups. This high-performance water pump is designed to enhance engine temperature...

Schnitz Throttlebody Clamp Suzuki Hayabusa (99-07)

The one piece billet aluminum throttle body clamp uses C-rings with set screws to hold the clamp onto the head and throttlebody replacing the stock rubber boots that can fail.  The O-ring seal is superb and has been tested to 120 psi with no...

RCC Throttlebody Clamp Suzuki Hayabusa (08-23)

This billet aluminum throttlebody clamp uses O-rings and is positively clamped, replacing the stock rubber boots that can fail.  The O-ring seal is superb.  Great for nitrous guys that want good material to drill and tap for their wet nitrous...

RCC Inline Electric Water Pump

Introducing our inline water pump, a powerhouse capable of moving 5 gallons of water per minute while drawing a mere 1 amp of current. Whether you're into nitrous, turbo, or prefer an all-motor setup, this pump is your go-to solution. Experience...

Schnitz Turbo Oil Scavenge Pump

The Schnitz Racing Electric Scavenge Pump allows oil from your turbo to be quickly removed and placed back into your engine. If a turbo is mounted below engine oil level it can not properly drain. The solution is a scavenge pump. With brass gears and...